Modbus Poll+Modbus Slave 安装包及注册码
附件包含：
Modbus Poll 7.2.5(64位)官方下载链接
Modbus Slave 8.2.3 (64位) 官方下载链接
OverviewModbus Poll uses a multiple windows user interface. That means you can open several windows showing different data areas or data from different slave ID's at the same time. You can write any text in the Alias cells.In any dialog box you can press the F1 key for more help on that specific topic.
If your slave device allows you to change a Holding register then you double click the cell or just start typing a new value in the cell. Then an edit dialog box is shown.Change the read/write definitionTo change the read/write definition of a window you can press F8 or select "read/write definition" from the Setup menu.
Here you define which data to show in the window. This setup shows how to read 10 Holding Registers from address 0. Address 40001 in some protocol descriptions. Note that Modbus Poll uses Modbus addresses which always counts from 0.
Device and MODBUS address rangesDevice addressMODBUS addressDescriptionFunctionR/W
1...10000*address - 1Coils (outputs)01Read/Write
10001...20000*address - 10001Discrete Inputs02Read
40001...50000*address - 40001Holding Registers03Read/Write
30001...40000*address - 30001Input Registers04Read
How to make a connectionThere is no data to display if you have not made a connection. To do so press F3 or select connect from the connection menu. For more detailed help press F1.
This connection use Modbus TCP/IP.5 different connection types are available however only 2 of them are standard Modbus connections:
[*]Serial port
[*]Modbus TCP/IP
For serial connection you may need an USB to RS485, or an RS232 to RS485 converter.
Modbus Poll注册码：
5A5742575C5D391A17627B6C010350
Modbus Slave注册码：
54554154514756666A655A187D545E505C454F
根据官网链接，下载对应版本程序，注册码亲测可用 顶顶顶顶顶顶顶顶顶顶顶
页:
[1]